Diminishing abrasives refine light swirls, fine scratches and 2000–2500 grit marks to a high-gloss finish that is ready for SiC protection.
5 · 8 reviewsSame bottle, same price when it lands. Join the list and you'll get one email the day it's back. No coupon, no markup.
One email when it's back. Unsubscribe any time.
Real products at their everyday price, added to your cart in one tap. The total is the plain sum.
Protection locks in whatever is underneath it. Take light swirls out with the Finishing Polish on the medium-cut Aqua Buff Orange pad, then protect it with VITRIFY MAX and buff with The Swiss.
Every figure comes from our own product documentation. If we have not documented it, it is not on this page.
Diminishing abrasives. Clean finish. A fine-cut, high-gloss finishing polish for light swirls, fine scratches, oxidation and 2000 to 2500 grit sanding marks. Low-dusting.
Protection sits on whatever is underneath it. This is the polish we finish with before Katch 22 or VITRIFY MAX goes on.
Always test in an inconspicuous area first and follow the stated dilution and dwell times.
Still stuck? Email info@aqualuxdetail.store. A detailer answers.
Yes, for light defects. It is built as a one-step finishing polish. Heavier defects need more cut first.
We polish in the shade on cool panels. Heat makes any polish harder to work and harder to wipe off.
A dual-action or rotary polisher with a foam finishing or polishing pad.
It is safe on gloss paint, clear coats and gel coats.
5 in · Medium
6
350 · 16 × 16 in, 10-pack
10
SiC-advanced ceramic spray coating (silicon carbide) · Ready to use. Spray and wipe, no flash time
12
Silicon carbide (SiC) infused spray sealant · Ready to use. Spray, spread, buff
13
Used three bottles on my 32-foot RV. The gel coat looks incredible and washing it is so much easier now. Water sheets off the sides and dirt doesn't stick like it used to. Saved me hours of scrubbing. Great product for large vehicles.
The working time on this polish is generous. It doesn't dry out on the pad or flash too quickly. I can work a full panel without rushing. That makes a big difference in the final result, especially for someone who's still learning.
I use this as my final polishing step before applying AQUASiC MAX. It leaves the paint perfectly clean and smooth for the coating to bond to. The two products work great together. Smart to buy from the same brand.
My black car was covered in swirl marks from bad wash technique. One pass with this polish on a DA polisher and the swirls were gone. The finish was clear and glossy. Didn't need to follow up with a finer polish — this one did the job in one step.
This works as both a compound and a polish depending on the pad you use. On a cutting pad it removes scratches, on a finishing pad it refines to a mirror finish. Versatile product that replaced two bottles in my kit.
I don't have a polisher so I applied this by hand with a foam applicator. It took more effort but the results were still impressive. Removed light scratches and left a smooth, glossy finish. Not everyone has a DA — nice that this works both ways.
My biggest complaint with other polishes is the dust they create. This one has zero dust. Clean to work with, easy to wipe off, and the results are excellent. My garage stays clean and my paint looks perfect.
These are my go to pads, they're durable, cut great and definitely a work horse in my polishing arsenal. Pair this pad and with aqualux polish and you'll have a REALLY good one step polishing combo!
