Skip to main content
Free U.S. shipping over $100 Tested daily in our pro detailing studio One price. No codes.
Shop · 4 products

Car Wash Soap, Rinseless Wash & Wash Mitt

The wash is where swirls start or stop. This is the wash chemistry and the mitt we run on every car in our pro detailing studio. Stop paying for water: AQUA-SUDS mixes at 1–2 oz per bucket, and one bottle of AQUA-RINSE 2.0 makes up to 32 gallons of rinseless wash.

Which wash product to buy

ProductTypeDilutionYieldUse it when
AQUA-SUDSpH-neutral (7.0) wash soap concentrate1–2 oz per 3–4 gal bucket; 1 oz in a foam cannon8 to 16 buckets per 16 ozEvery maintenance wash on a sealed or coated car
AQUA-RINSE 2.0Rinseless wash concentrate, pH-balanced½ oz per gallon; 1:16 as quick detailer or clay lubeUp to 32 gallons per 16 ozNo hose, limited water, garage or apartment washing
BUGZ B GONEBug and tar remover concentrate, pH-balanced10:1 (water to product)—Pre-treating bug-heavy fronts before the contact wash
Twisted Swiss Mitt1400 GSM twisted-loop and chenille wash mitt——The contact wash: paint, bugs and glass

How to choose

  • Have a hose: AQUA-SUDS and the Twisted Swiss Mitt, top to bottom, one panel at a time.
  • No hose or water restrictions: AQUA-RINSE 2.0 at ½ oz per gallon, dry each panel right away.
  • Front end covered in bugs: BUGZ B GONE at 10:1, dwell 45 to 60 seconds on a cool surface, rinse, then wash.
  • Then dry: with the SLURPY 20×30 or SLURPY MAXX 26×34.

Questions detailers ask

Will AQUA-SUDS strip my sealant or coating?

No. AQUA-SUDS is pH-neutral (7.0) and built as a maintenance soap for cars protected with sealants, coatings or wax. Use 1 to 2 oz in a 3 to 4 gallon bucket, or 1 oz in a foam cannon.

When do I use AQUA-RINSE 2.0 instead of soap?

When you have no hose or limited water. Mix ½ oz per gallon for a rinseless wash. The same bottle mixes 1:16 as a quick detailer or clay lubricant.

How do I use BUGZ B GONE?

Dilute 10:1 (water to product), spray on a cool surface, let it dwell 45 to 60 seconds without drying, then rinse with a strong stream of water before the contact wash.

Do I need a separate bug sponge?

No. The chenille fingers on the Twisted Swiss Mitt handle bug and tar deposits. For baked-on splatter, pre-treat with BUGZ B GONE first.

Always follow the stated dilution and dwell times.

!