AQUASiC MAX is a bottled, professional-grade silicon carbide (SiC) ceramic coating for detailers and experienced enthusiasts. This is the base AQUASiC MAX formula.
It is a full install, not a spray: decontaminate, correct the paint, apply panel by panel, level, and let it cure before water exposure. If that sounds like more than you want to take on, VITRIFY MAX gives you SiC protection in one spray-and-wipe step.
| Chemistry | SiC-infused ceramic coating |
|---|---|
| Application | Single layer |
| Install | Decontamination, paint correction, leveling and cure |
Results depend on surface prep, installer leveling technique, climate and maintenance washing. We do not put a time figure on any coating. Test in an inconspicuous area first and follow the application and cure instructions.
SiC-advanced ceramic spray coating (silicon carbide) · Ready to use. Spray and wipe, no flash time
12
Lint-free microsuede on firm foam block · 1.5 × 1.5 × 3 in
5
SiC-infused trim coating, silicone-free · Exterior plastic, rubber, vinyl. Not for paint
9
Aquasic MAX! Let’s talk about it. First off, this was a brand new car that left the dealership and came straight to me. Paint was already putting off gloss and depth. I started applying MAX to the paint after all proper prep. I COULDNT BELIEVE IT. The ease of this coating, the flash is almost instant, but I left it on the paint for 3 minutes and it buffed off, effortlessly! I did the fender, then the door, then buffed the fender and then the door. You can’t mess this up! It’s FOOL PROOF! I text Landon and said “bruh.” Cause this was insane. He responded with “well check it in an hour and it should be glossier and slicker.” He wasn’t wrong. If you’re thinking about trying it, you won’t regret it. Also, grab the slurpy max cause it’s in my opinion the best drying towel I’ve used. Dried a Peterbilt 389 EXHD and still had room left for more. Keep bringing the heat Landon!
