Tools & Polishing
Microsuede Applicator | Coating & Spray Sealant Applicator Block — 1.5×1.5×3 in
Lint-free microsuede on firm foam block · 1.5 × 1.5 × 3 in
5
Up to 3 years of protection with proper prep and maintenance.
AQUASiC MAX is a bottled, professional-grade silicon carbide (SiC) ceramic coating for detailers and experienced enthusiasts. This is the base AQUASiC MAX formula. It is a high-solids coating that lays down about 1 to 2 microns when applied as directed.
It is a full install, not a spray: decontaminate, correct the paint, apply in small sections, let it flash, and buff it off. No leveling is needed. If that sounds like more than you want to take on, VITRIFY MAX gives you SiC protection in one spray-and-wipe step.
Letting the coating flash is the most important part of the install. This is a buff-off coating. There is no leveling step. Apply it, give it time to flash, then buff it off.
For full-size vehicles, SUVs, and trucks, we highly recommend using two bottles so you have enough product to coat the vehicle properly.
The vehicle can be washed on day 7. We highly recommend waiting until day 14 for the first wash.
| Chemistry | High-solids SiC ceramic coating |
|---|---|
| Durability | Up to 3 years with proper prep and maintenance |
| Film thickness | About 1 to 2 microns |
| Application | Single layer, buff-off (no leveling) |
| Flash time | 5 to 10 minutes |
| Section size | 20 inch by 20 inch, and no larger |
| First wash | Okay on day 7; waiting until day 14 is recommended |
| Install | Decontamination, paint correction, flash and buff-off |
| Coverage | Two bottles recommended for full-size vehicles, SUVs, and trucks |
Results depend on surface prep, giving the coating enough time to flash, climate and maintenance washing. The up-to-3-year figure assumes a full install on properly prepped paint, a complete cure and regular maintenance washing. Test in an inconspicuous area first and follow the application and cure instructions.
Lint-free microsuede on firm foam block · 1.5 × 1.5 × 3 in
5
350 · 16 × 16 in, 10-pack
10
I tried one of those $30 ceramic coating kits from AutoZone and it lasted maybe 3 weeks. This is a completely different product. Real ceramic technology, real protection, real durability. You get what you pay for.
Watched the tutorial video, prepped my paint, and had the coating applied in about 3 hours including cure time. The instructions were clear and the product was easy to work with. My Mazda looks like it just left a professional coating shop.
At $80, I could afford to coat my car, my husband's truck, and my daughter's sedan. All three look amazing and the protection has been consistent across all vehicles. Great value for families who want to protect multiple cars.
This was my first ceramic coating and it was the perfect entry point. Easy to apply, forgiving cure time, and the results are impressive for the price. My car has been protected for 3 months now and still beading strong. Will upgrade to the 10-year next time.
I have been professionally detailing for 15 years and this is by far the absolute best coating I have ever used
At $23, this competes with polishes that cost $35-45. The cut rate is good, the finish is clean, and it works on both soft and hard clear coats. I've used it on everything from Honda to Porsche with great results across the board.
This is on my daily driver that sees highway miles, parking lots, and the occasional dirt road. Five months in and the coating is still performing. Bugs wash off easy, water beads perfectly, and the paint looks great. Real protection for real driving.
I've used coatings that cost $150+ and this $80 coating performs just as well for the first couple years. The SiC technology gives it a hardness that cheaper coatings lack. Smart buy if you don't need a decade of protection.
When I first started Detailing , I relied on Coding. It’s a Perfect beginner, and Pro level coding for all vehicles can be used very easily, and that’s great beading power.
You're in. Watch your inbox.
Just sale reminders and new drops. Unsubscribe anytime.