AQUASiC MAX is a bottled, professional-grade silicon carbide (SiC) ceramic coating for detailers and experienced enthusiasts. Tier 10 carries the highest concentration of SiC in the AQUASiC MAX line and is meant for professional installers.
It is a full install, not a spray: decontaminate, correct the paint, apply panel by panel, level, and let it cure before water exposure. If that sounds like more than you want to take on, VITRIFY MAX gives you SiC protection in one spray-and-wipe step.
| Chemistry | Professional-grade silicon carbide (SiC) |
|---|---|
| Application | Single layer |
| Install | Controlled environment, decontamination, paint correction, leveling and cure |
Results depend on surface prep, installer leveling technique, climate and maintenance washing. We do not put a time figure on any coating. Test in an inconspicuous area first and follow the application and cure instructions.
SiC-advanced ceramic spray coating (silicon carbide) · Ready to use. Spray and wipe, no flash time
12
SiC-infused trim coating, silicone-free · Exterior plastic, rubber, vinyl. Not for paint
9
Ceramic-infused sealant concentrate · 1 gallon trigger-sprayer batch with distilled water: 2 oz maximum, 1.25 oz standard, 0.5 oz maintenance. Never undiluted
I was going back and forth between this and a cheaper coating. Glad I went with the 10-year. The application was smooth, the leveling was easy, and the results speak for themselves. My Audi looks better than when I picked it up from the dealer.
I offer this as my premium coating option and every single client has been blown away. The depth of gloss is noticeably better than other coatings I've used. It's become my go-to recommendation for anyone who wants the best protection available.
Bird droppings, tree sap, water spots — everything wipes right off without leaving a mark. Before the coating I was constantly doing paint correction. Now I just wash and go. The protection is real.
I applied this to my 2024 Corvette in June. It's now February and the water still beads and sheets off like day one. I've been through rain, car washes, and a Texas summer. The gloss is still deep and the surface is slick. This is a legit long-term coating.
The hydrophobic properties on this coating are next level. After a rain, my car looks like it was just waxed. Water doesn't just bead — it flies off. I've never seen anything like it from a consumer-grade product.
First time doing a ceramic coating. Watched Landon's videos, prepped the paint properly, and applied it in my garage. The instructions were clear and the product was forgiving to work with. Two coats on my black F-250 and it looks like glass. Couldn't be happier.
Used this on my center console boat that sits in saltwater. Four months in and the gel coat still looks freshly polished. Salt rinses right off. If it can handle a marine environment, it can handle anything.
Had a question about application temperature and Landon personally responded within an hour. The product itself is outstanding but the support behind it is what makes me a repeat customer. You don't get that from the big brands.
My headlights collect bugs like crazy. This cleans them up perfectly without hazing the clear coat or any protective film. I spray it on before a wash and by the time I get to the front end everything just rinses off.
