Professional SiC Application System
The spray and the towel it is buffed with. VITRIFY MAX goes on in one spray-and-wipe step; The Swiss gives you a clean 350 GSM face for every panel.
- VITRIFY MAX$79.99
- The Swiss 16×16 10-Pack$22.99
Silicon carbide (SiC) ceramic spray coating in one spray-and-wipe step: deep gloss, a slick finish and tight water beading on paint, glass, plastic trim and wheels.
5 · 12 reviewsReal products at their everyday price, added to your cart in one tap. The total is the plain sum.
The spray and the towel it is buffed with. VITRIFY MAX goes on in one spray-and-wipe step; The Swiss gives you a clean 350 GSM face for every panel.
Protection locks in whatever is underneath it. Take light swirls out with the Finishing Polish on the medium-cut Aqua Buff Orange pad, then protect it with VITRIFY MAX and buff with The Swiss.
Every figure comes from our own product documentation. If we have not documented it, it is not on this page.
Our flagship. SiC ceramic protection from a spray. VITRIFY MAX is an SiC-advanced ceramic spray coating built on next-generation silicon carbide chemistry, not a standard SiO₂ quick spray. It goes on paint, glass, plastic trim and wheels in one spray-and-wipe step with no flash time, no leveling and no cure window, and leaves a deep gloss, a slick finish and tight water beading.
Ships with a cap. Sprayer not included.
Most ceramic sprays are built on silicon dioxide (SiO₂). VITRIFY MAX is built on silicon carbide (SiC) chemistry instead. You still apply it the same simple way: spray, spread, buff. The difference is the chemistry in the bottle, not the work it takes.
Traditional coatings demand a controlled room and hours of leveling. VITRIFY MAX goes on in a wide range of application conditions, so we can put SiC protection on a whole vehicle in one spray-and-wipe pass in the bay we actually work in.
| Product | What it is | Where it goes |
|---|---|---|
| VITRIFY MAX | SiC ceramic spray coating | Paint, glass, plastic trim, wheels |
| Katch 22 | SiC spray sealant | Paint, on its own or over a coating |
| Unicorn Dust | SiC-infused spray sealant | Paint, glass, chrome, plastic trim |
Only if the paint has swirls you want gone, because protection locks in whatever is underneath. For that step, use Finishing Polish on an Aqua Buff Orange pad.
The SiC Protection System on Start Here is VITRIFY MAX and The Swiss 10-Pack in one tap, and it qualifies for free U.S. shipping on orders over $100 (except merch). More on the method: How to Apply a Ceramic Spray Coating and Ceramic Coating in Heat and Humidity.
Unopened, VITRIFY MAX keeps for about 18 months. Once opened, use it within about 9 months. Both figures assume a controlled storage environment: cool, dry, out of direct sun, with the cap sealed tight. Heat, freezing or a loose cap shortens shelf life, because air and moisture slowly start the curing process in the bottle.
How long a spray layer holds depends on your wash routine, weather and prep. Watch how water behaves on the surface and reapply when the beading drops off.
Still stuck? Email info@aqualuxdetail.store or use the contact form.
VITRIFY MAX is an SiC-advanced ceramic spray coating. You mist a panel, spread it and buff it clear. There is no multi-hour install, no leveling and no cure window.
How long it holds depends on your wash routine, weather and prep. Wash with a pH-neutral soap and reapply when water stops beading the way it did after application.
Both are SiC sprays. VITRIFY MAX is our SiC-advanced ceramic spray coating for paint, glass, plastic trim and wheels in one step. Katch 22 is our everyday SiC spray sealant for paint, not a coating.
Yes, with care. Work in the shade on panels that are cool to the touch, one panel at a time, and buff it clear before it dries.
The Swiss 16×16 10-Pack, 350 GSM. Turn to a clean face as soon as one feels loaded, and keep your drying towel for drying.
A spray-on coating built on silicon carbide (SiC) chemistry rather than the SiO2 base most ceramic sprays use. It goes on in one spray-and-wipe step.
Yes. Paint, glass, plastic trim and wheels.
Only if the paint has swirls you want gone, because protection locks in whatever is underneath.
Fine cut, high-gloss finish · Light swirls, fine scratches, 2000–2500 grit marks, oxidation
8
5 in · Medium
6
350 · 16 × 16 in, 10-pack
10
Neutral (7.0) · 1–2 oz per 3–4 gal bucket; 1 oz in a foam cannon
9
I am a mobile detailer in Houston and I work outside year round. In the summer it is 95 plus degrees and most spray coatings flash before you can even wipe them. Vitrify was the first product that let me work in direct sunlight without streaking. Max takes it up a notch. Applied it to a client's white Tesla and the slickness was unreal. Two maintenance washes later and it still looks freshly coated. This is my go-to now.
I was skeptical about the claim that you can apply this in direct sunlight. Every coating I have ever used required shade or a garage. Tested it on my hood at noon on a clear day just to see what would happen. Zero streaking. Zero flash issues. It leveled out perfectly and the gloss was immediate. I went ahead and did the rest of the car. Honestly impressed. This is the easiest coating I have ever applied.
I have tried a lot of spray coatings over the years and most of them either streak during application or wash off after a few weeks. Vitrify Max is completely different. I sprayed it on my black F-150 in my driveway on a Saturday afternoon and the gloss was immediate. Three weeks later it still beads water like day one. The fact that you just spray and wipe with no flash time is a game changer for someone like me who details on the side.
You're in. Watch your inbox.
Just sale reminders and new drops. Unsubscribe anytime.